SPORE™ Chlorinated
SPORE™ Chlorinated Office & Others By Application Finger Cots Malaysia, Selangor, Kuala Lumpur (KL), Japan, Vietnam, USA Manufacturer, Supplier, Supply, Supplies | Suzuki Latex Industry Malaysia Sdn Bhd
Chemical Description.

 CHLORINATED finger cots are manufactured from 100% pure natural rubber latex.


Specified S15 M18
Internal Diameter (mm) 15 18
Thickness (mm) 0.1 ± 0.02
Length (mm) Unroll, Roll, Cut 63 ± 2
Physical Test (ASTM D412)
Tensile Strength

Min 700 %
 Min 25 Mpa

Product range and packaging specifications

Size Thickness (mm) Type Packaging
S15 Rough Surface Unroll / Cut / Roll 1440pcs x 20bags per carton
M18 Rough Surface Unroll / Cut / Roll


  • To protect fingers of workers.
  • To prevent contamination caused by direct contact with fingers.
  • Rough surface provides better grip and anti-slip properties.
  • SPORE™ “cut” type
    - The rim of the cots are cut off to reduce finger fatigues and discomfort.
  • SPORE™ “unroll” type
    - Beading provides an easy way to wear or remove from the fingers.
  • SPORE™ “roll” type
    - Pre-rolled, it is very easy to wear or remove from the fingers

  • Electronics industries
  • Mechantronics industries
  • Optotronics industries

Recommended Storage Conditions.
  • Store indoor at room temperature below 28ºC.
  • Avoid direct exposure to sunlight.
  • Once open, use immediately

Shelf life.
Approximately 9 months.
If finger cots contaminated, please dispose as Scheduled Wastes. Finger cot is bio-degradable type.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version