SPORE™ Pink AS Chlorinated
SPORE™ Pink AS Chlorinated ESD By Application Finger Cots Malaysia, Selangor, Kuala Lumpur (KL), Japan, Vietnam, USA Manufacturer, Supplier, Supply, Supplies | Suzuki Latex Industry Malaysia Sdn Bhd
Chemical Description

 PINK AS CHLORINATED Type finger cots are manufactured from 100% pure natural rubber latex.


Specified Properties S M L
Internal diameter (mm) 15 16.5 & 18 21
Thickness (mm) 0.1 ± 0.02
Length (mm)

63 ± 2
63 ± 2
Physical Test (ASTM D412)
Tensile Strength

Min. 700%
Min. 25 Mpa
Average Surface Resistivity (ASTM D257) 1010 ~ 1012 Ohm/square

Product range and packaging specifications

Size Surface texture Type Packaging
M18 & M16.5
Smooth Unroll
1152 pcs x 20 bags per carton
1440 pcs x 20 bags per carton

  • This powder free finger cots suitable to use in Cleanroom.
  • To protect fingers of workers.
  • To prevent contamination caused by direct contact with fingers.
  • Suitable for handling ESD sensitive components or assemblies that requires anti-static properties.
  • Better grip and anti-slip properties.
  • SPORE™ “unroll” type
    - Beading provides an easy way to wear or remove from the fingers.
  • SPORE™ “roll” type
    - Pre-rolled, it is very easy to wear or remove from the fingers.

  • Electronics industries
  • Mechantronics industries
  • Optotronics industries

Recommended Storage Conditions.
  • Store indoor at room temperature below 28ºC.
  • Avoid direct exposure to sunlight.
  • Once open, use immediately.

Shelf life
Approximately 9 months.
If finger cots contaminated, please dispose as Scheduled Wastes. Finger cot is bio-degradable type.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version